Standard Door Bumper
Standard Honda Adapter
Standard Stack Adapters
Optional Axle/Truck Adapters
Optional Air/Electric Station
Productivity Features:
- Heavy duty columns with close fitting carriages for smooth and secure vehicle lifting
- Choose an installation height of 138½” or 148½” (TLS210SRx1 and TLS210NRx1 only)
- Installation height of 172″ (TLS210NXx1 only)
- Twin hydraulic cylinders and cable equalization for dependable performance
- Powerpack can be mounted on driver or passenger side for individual application
- 3 inch steel cable pulleys for durability and low maintenance
- Mechanical safety locks automatically engage at 16 different operating heights
- Single point safety lock release and two hand lift lowering contribute to safe operation
- Stack pad lift system with standard 1½” , 3″ and 6″ height extension adapters
- Bumper guards on both columns protect vehicle doors from damage
- 230V – 1 phase – 60 Hz – 20 Amp power required
Specifications:
TLS210SRx1 | TLS210NRx1 | TLS210NXx1 | |
Capacity | 10,000 lbs. | 10,000 lbs. | 10,000 lbs. |
Lifting Type | Symmetric | FleXmetric | FleXmetric |
Overall Width | 135½” | 135½” | 135½” |
Width Between Columns | 113” | 113” | 113” |
Drive Thru Width | 100″ | 92” | 92” |
Overall Height | 138 ½” – 148 ½” | 138 ½” – 148 ½” | 172” |
Lowered Height – Standard Lift Pad | 4 ½” | 4 ½” | 4 ½” |
Raised Height – Standard Lift Pad | 75” | 75” | 75” |
Raised Height with adapters | 84” with 3’ & 6” adapters | 84” with 3’ & 6” adapters | 84” with 3’ & 6” adapters |
Retracted Front Arm Length | 37” | 23” | 37” |
Retracted Rear Arm Length | 37” | 37” | 37” |
Extended Front Arm Length | 55” | 43” | 55” |
Extended Rear Arm Length | 55″ | 55” | 55” |
Lift Time | 50 seconds | 50 seconds | 50 seconds |
Power Requirements | 220VAC 60Hz 1 Ph 20 A | 220VAC 60Hz 1 Ph 20A | 220VAC 60Hz 1 Ph 20A |
Shipping Weight | 1,990 lbs | 1,990 lbs | 2,090 lbs |
Optional Accessories:
- Air/Electric Station (TLS2AES)
- Set of 2 Axle/Truck Adapters (TLSTA-2)
Lift Safety Standards:
Most of TLS Lifts are third party tested by ETL and certified by ALI to meet or exceed strict ANSI standards such as cable cut and deformation tests. Be sure the lift you buy has the gold ALI/ETL label that assures your lift has been tested to meet these standards.
Shipping Details:
We offer drop shipping from the manufacturer to your address. Buyer MUST have their own offloading equipment such as a forklift. Tailgate service is not supported.
Available Options:
- TLS210SRx1 (Symmetric)
- TLS210NRx1 (FleXmetric)
- TLS210NXx1 (Extended Height FleXmetric)